| |
|
 |
| |
OLSEN- Ultra Max III - High Efficiency
Gas Furnace |
| |
The Olsen UltraMAX III gas furnace has been designed to deliver
warmth, savings and peace-of-mind to families looking for maximum
efficiency for every energy dollar they spend. |
| |
Olsen’s 60+ years of building top quality, reliable home comfort
products continues as we design our products in response to customer
requests for: |
 |
Safety: We focus on safety during research and development
of all new products. The UltraMAX III features an overheat limit and
blocked-vent shut-off as well as a main gas valve shut-off. In fact,
UltraMAX III significantly exceeds all national safety requirements
as set out by ANSI and each unit is factory tested before shipment
to ensure proper functioning of all safety devices. |
|
Reliability: Before we approve any component for use
on the UltraMAX III, it has to pass extensive testing, often simulating
over 20 years of normal operation. The results of this testing confirm
that you can expect many years of worry-free operation from your Ultramax
furnace, so we are happy to guarantee the heat exchanger for life
and all other components for five years. |
|
Compact Size: At just 36" high and less than 30"
deep, the UltraMAX III fits into tight spaces, even closets, providing
installation flexibility and ensuring maximum comfort. Clearances
to combustibles are zero on all sides and rear and 2" in front. |
|
Overall Comfort: UltraMAX III comes air conditioning
ready and factory equipped with humidifier and electronic air cleaner
connections. That, coupled with its 95% AFUE (Annual Fuel Utilization
Efficiency), means that while you’re comfortable inside your
home, you’ll also be comfortable knowing that your furnace is
not costing you extra money in wasted fuel. |
| |
Features & Benefits |
|
 |
Olsen's UltraMAX III furnace is available in four firing
rates to accommodate most domestic heating requirements. |
|
Easy Installation/ Maintenance Compact insulated cabinet
with brass thumbscrews that keep the door sealed while still allowing
easy removal of front panels for access to burner and controls. Units
are shipped air conditioning ready. Furnace is easily adapted for
continuous slow speed operation and includes humidifier and electronic
air cleaner connections. |
|
Slide-out Blower Slide out blower and control panel with plug-in
electrical connectors make servicing the UltraMAX III fast and easy. |
 |
|
Aluminized Base Aluminized steel base panel for corrosion resistance
and ease of installation. |
|
Secondary Heat Exchanger Stainless steel recovery coil contributes
to maximum efficiency by capturing the latent heat from the flue gas. |
|
HoneywellTM Smart Valve II State-of-the-art microprocessor gas valve
with diagnostic system provides precision operation and troubleshooting
information, thereby saving time on service calls. |
|
Induced Draft Fan Combustion gases are vented safely and reliably
by the state-of-the-art draft inducer featuring sealed ball-bearings
which eliminate the need for oiling and have a longer life than the
more common sleeve bearings. |
| |
Tubular Heat Exchanger Unlike smooth bend designs,
the controlled wrinkle-bend design of our heat exchanger reduces thinning
in the bends to provide longer lasting heat exchanger life. |
| |
|
 |
| |
Olsen High Performance Mid-Efficiency Gas Furnace |
|
| |
The Olsen UltraHEAT gas furnace has been designed to bring warmth,
savings and peace-of-mind to families looking to achieve maximum home
comfort on a budget. |
 |
| |
Olsen’s 60 years of building top quality, reliable home comfort
products continues as we design new products in response to customer
requests for: |
|
Safety: We focus on safety during research and
development of all new products, and the UltraHEAT furnace significantly
exceeds all national safety requirements as set out by ANSI. |
|
Reliability: The Olsen UltraHEAT furnace has been
subjected to extensive cycle testing to simulate 20 + years of normal
usage and the results indicate that the heat exchanger (guaranteed
for life) should not need replacing and that the other state-of-the-art
components will provide many years of trouble-free operation. |
|
Compact Size: At just 36" high and less than
30" deep, the UltraHEAT furnace fits into tight spaces, even
closets, upright or horizontally providing installation flexibility
and ensuring maximum comfort. |
|
|
Whisper Quiet Operation: Our customers told us
that noise level was an important factor in their satisfaction with
a furnace so we designed the UltraHEAT to be “ultra quiet”. |
|
|
Our Five-Year Parts Warranty provides even more
assurances. Olsen warrants to the original purchaser that any component
(subject to the limitations set out in the actual warranty) of the
furnace will be free from defects in materials and workmanship for
a period of five full years... ... or we’ll supply a replacement
part free of charge! |
 |
|
Olsen’s Limited Lifetime Warranty is among
the best in the industry! Every Olsen furnace comes with our guarantee
to the original purchaser that the heat exchanger will be free from
defects in materials and workmanship as long as you own the appliance...
... or we’ll supply a replacement free of charge! |
| |
Features & Benefits |
|
Easy Installation/ Maintenance Compact insulated
cabinet with easily removable front panels allows access to burner
and controls. Units are shipped air conditioning ready. Plug-in electrical
connectors included. Furnace is easily adapted for continuous low
speed operation. |
|
Slide-out Blower Slide out blower and control panel
with plug in electrical connectors make servicing the UltraHEAT fast
and easy. |
|
Aluminized Base Aluminized steel base panel for
corrosion resistance and ease of installation in the upflow configuration. |
|
Induced Draft Fan Combustion gases are vented safely
and reliably by the stateof- the-art draft inducer which features
sealed ball-bearings for longer life than the more common sleeve bearings. |
|
|
HoneywellTM Smart Valve II State of the art microprocessor
gas valve diagnostic system provides precision operation and troubleshooting
information, thereby saving time on service calls. |
|
|
Tubular Heat Exchanger The controlled wrinkle-bend
design reduces thinning in the bend for longer lasting heat exchanger
life than smooth bends can provide. |
|
|
Multi-Position Can be installed in upflow, horizontal
left or horizontal right configuration. |
|
| |
|
|
| |
Garage heaters |
|
|
FSA - Cayenne Unit Heater |
|
| |
Applications |
| |
· Economical heating of residential garages where a low profile
is preferred |
| |
Features |
| |
Dependable Performance |
| |
- ·Inshot burner assembly is easy to clean and won’t
rust like ribbon-type burners
- Direct-spark ignition lights the burners directly, eliminating
pilot outages
- Tubular heat exchanger eliminates metal stresses and cracking
that can occur in clamshell heat exchangers
- Heavy-gauge prepainted cabinet maintains its appearance for
years to come
|
|
|
FOA - Separated Combustion Heater |
|
| |
Applications |
|
| |
Low-profile heating of residential garages where separated combustion
is necessary or preferred |
|
| |
· First residential unit heater approved that requires a
certified installation |
| |
Features |
| |
Dependable Performance |
| |
- Inshot burner assembly is easy to clean and won’t rust
like ribbon-type burners
- Direct-spark ignition lights the burners directly, eliminating
pilot outages
- Tubular heat exchanger eliminates metal stresses and cracking
that can occur in clamshell heat exchangers
- Heavy-gauge prepainted cabinet maintains its appearance for
years to come
- Separation between the combustion air and the heated space extends
performance lifecycle by reducing chance of corrosion or build-up
on the heat exchanger
|
|
| |
|
|
| |
High Efficiency Residential Air Conditioners |
|
| |
PERFORMANCE: |
|
| |
- Efficiency rating of 10.0 and 12.0 SEER
- Cooling capacities 11/2 to 5 tons
- Rated in accordance with U.S. D.O.E. test standards
|
|
| |
FEATURES: |
| |
- Quiet top air discharge
- G-90 galvanized steel exterior cabinet with 1,000-hour salt
spray powder-coated finish
- Long-life copper tubes, aluminum fin refrigerant coils
- State-of-the-art compressors
- Powder-coated fan guard and full metal louvered coil guard
for hail protection
- Large wrap-around coil surface
- Control box located for easy access to electrical controls
- Formed base with 21/2" ground clearance
- Factory installed liquid line filter dryer
|
| |
|
|
| |
|
|
|
